Lifts - Pallet Trucks

• Polyurethane wheels bonded to an aluminum core w/ oversize bearings.
• One-piece solid ductile iron bell-crank.
• Solid 1" square push rods for strength.
• One-piece cast ductile iron load wheel forks.
• One-piece ductile iron pump housing, no welds to break or leak.
• Internal self bleeding pump, easily re-buildable from seal kit.
• Three position pump w/ neutral
• Articulating steer wheel axle
• Stress proof axles/ Grade 5 fasteners
• Readily available parts, same say shipping from stock.

• Cast steel fork toes, braced
• 7 gauge fork material, 6" wide
• 80 durometer polyurethane on steel load wheel

Optional Equipment:

• Load Back Rest (60" tall)
• Load Stabilizer Bar
• Steel Load Wheels
• Steel Steer Wheels
• Grease Fittings (15)
• Skid Adapter - 3", 4", 5"
• Tandem Load Wheels
• Ramp, Ramp/Park Brake
• Custom Paint Colors

• Polyurethane wheels bonded to an aluminum core w/ oversize bearings.
• One-piece solid ductile iron bell-crank.
• Solid 1" square push rods for strength.
• One-piece cast ductile iron load wheel forks.
• One-piece ductile iron pump housing, no welds to break or leak.
• Internal self bleeding pump, easily re-buildable from seal kit.
• Three position pump w/ neutral
• Articulating steer wheel axle
• Stress proof axles/ Grade 5 fasteners
• Readily available parts, same say shipping from stock.

• Cast steel fork toes, braced
• 7 gauge fork material, 6" wide
• 80 durometer polyurethane on steel load wheel

Optional Equipment:

• Load Back Rest (60" tall)
• Load Stabilizer Bar
• Steel Load Wheels
• Steel Steer Wheels
• Grease Fittings (15)
• Skid Adapter - 3", 4", 5"
• Tandem Load Wheels
• Ramp, Ramp/Park Brake
• Custom Paint Colors

• Polyurethane wheels bonded to a steel core on 2.5" lowered height.
• Steel load wheels standard on 2" lowered height.
• One-piece solid ductile iron bell-crank.
• Solid 1 x 3" square push rods for strength.
• One-piece cast ductile iron load wheel forks.
• Steel entry wheel, for easy entry at lowered heights.
• One-piece ductile iron pump housing, no welds to break or leak.
• Internal self bleeding pump, easily re-buildable from seal kit.

• Load Back Rest (60" tall)
• Load Stabilizer Bar
• Steel Load Wheels (Standard on 2', poly available at n/c.)
• Steel Steer Wheels
• Grease Fittings (15)
• Skid Adapter - 3", 4", 5"
• Tandem Load Wheels
• Ramp, Ramp/Park Brake
• Custom Paint Colors

• Polyurethane wheels bonded to an aluminum core w/ grease fitting.
• Stainless Steel linkage, all axles, pump piston, plunger, lift ram.
• Grease fittings at all pivot points.
• Low temperature hydraulic fluid prevents freezing, to 72° below zero.
• 7-gauge frame construction w/ cast steel fork ends, aluminum entry wheel.
• Solid 1 x 3" square push rods for strength.
• One-piece cast ductile iron load wheel forks.
• One-piece ductile iron pump housing, no welds to break or leak.

• Load Back Rest (60" tall)
• Load Stabilizer Bar
• Steel Load Wheels
• Steel Steer Wheels
• Skid Adapter - 3", 4", 5"
• Tandem Load Wheels
• Ramp, Ramp/Park Brake

• 33" wide frame for easy entry into a standard GMA 40 x 48 pallet.
• Steel load wheels standard on 2" lowered height.
• Polyurethane load wheels available at n/c.
• Independent ductile iron bell-cranks.
• Solid 1 x 3" square push rods for strength.
• One-piece cast ductile iron load wheel forks.
• Steel entry wheel, for easy entry at lowered heights
• One-piece ductile iron pump housing, no welds to break or leak.
• Internal self bleeding pump, easily re-buildable from seal kit.
• All parts in stock, ready for same day shipment.

• Load Back Rest (60" tall)
• Load Stabilizer Bar
• Steel Steer Wheels
• Grease Fittings (15)
• Skid Adapter - 3", 4", 5"
• Tandem Load Wheels
• Ramp, Ramp/Park Brake
• Custom Paint Colors

• 4 x 2 Phenolic casters for easy steering.
• Dual load wheels, single wheel on 6" fork.
• Load Stabilizer Bar, 25" on 12" fork, 22" on 9 or 6" fork.
• Solid 1 x 2" push rods for strength.
• One-piece cast ductile iron load wheel forks.
• One-piece ductile iron pump housing, no welds to break or leak.

• Load Back Rest (60" tall)
• Steel Load Wheels
• Steel Steer Wheels
• Grease Fittings (15)
• Skid Adapter - 3", 4", 5"
• Locking Casters
• 2" & 2.5" Lowered Height Available
• Custom Paint Colors

• Angled forks to cradle the roll.
• Polyurethane wheels bonded to an aluminum core w/ oversize bearings.
• One-piece solid ductile iron bell-crank.
• Solid 1" square push rods for strength.
• One-piece cast ductile iron load wheel forks.
• One-piece ductile iron pump housing, no welds to break or leak.
• Articulating steer wheel axle.
• Stress proof axles/ Grade 5 fasteners
• Cast steel fork toes.
• 7 gauge fork material.

• Load Stabilizer Bar
• Steel Load Wheels
• Steel Steer Wheels
• Grease Fittings (15)
• Tandem Load Wheels
• Ramp, Ramp/Park Brake
• Custom Paint Colors
• Turnbuckle (required over 4000lbs. or 48" long)
• 6K, 8K, and 10K weight capacities.

• Polyurethane steer wheels bonded to an aluminum core.
• Dual load wheels, total of 4 per truck.
• One-piece solid ductile iron bell-crank.
• Solid push rods for strength.
• One-piece cast ductile iron load wheel forks.
• One-piece ductile iron pump housing, no welds to break or leak.

• Load Back Rest (60" Tall)
• Load Stabilizer Bar
• Steel Load Wheels
• Steel Steer Wheels
• Grease Fittings (15)
• Increased Weight Capacities
• Skid Adapter - 3", 4", 5"
• Ramp, Ramp/Park Brake
• Custom Paint Colors
• 10" Wheels for 10" Lowered Height Truck.

• Polyurethane wheels bonded to an aluminum core w/ oversize bearings.
• One-piece solid ductile iron bell-crank.
• Solid 1" square push rods for strength.
• One-piece cast ductile iron load wheel forks.
• One-piece ductile iron pump housing, no welds to break or leak.
• Internal self bleeding pump, easily re-buildable from seal kit.
• Three position pump w/ neutral
• Articulating steer wheel axle
• Stress proof axles/ Grade 5 fasteners
• Readily available parts, same day shipping from stock.

• Cast steel fork toes, braced
• 7 gauge fork material, 6" wide
• 80 durometer polyurethane on steel load wheel

Optional Equipment:

• Load Back Rest (60" Tall)
• Load Stabilizer Bar
• Steel Load Wheels
• Steel Steer Wheels
• Grease Fittings (15)
• Increased Weight Capacities
• Skid Adapter - 3", 4", 5"
• Ramp, Ramp/Park Brake
• Custom Paint Colors
• 10" Wheels for 10" Lowered Height Truck.

• Polyurethane wheels bonded to an aluminum core w/ oversize bearings.
• Independent solid ductile iron bell-cranks.
• 1/4" fork material for strength.
• Cast steel fork ends.
• Solid 1 x 3" push rods for strength.
• One-piece cast ductile iron load wheel forks.
• Stress proof axles/ Grade 5 fasteners.
• Readily available parts, same day shipping from stock.

• Load Back Rest (60" Tall)
• Load Stabilizer Bar
• Steel Load Wheels
• Steel Steer Wheels
• Grease Fittings (15)
• Skid Adapter - 3", 4", 5"
• Tandem Load Wheels
• Ramp, Ramp/Park Brake
• Custom Paint Colors

• Heavy duty pump with 30+ year history.
• Steel load and steering wheels standard.
• Independent solid steel bell-cranks.
• 1/4" C Channel fork material for strength.
• Tandem load wheels on the 8000XT.
• Dual load wheels on the 10M, 12M.
• Solid 1 x 4" push rods for strength.
• One-piece cast ductile iron load wheel forks.
• Stress proof axles/ Grade 5 fasteners.
• Bottom of forks boxed in for strength.
• Readily available parts, same day shipping from stock.

• Load Back Rest (60" Tall)
• Load Stabilizer Bar
• Poly Load Wheels
• Poly Steer Wheels
• Grease Fittings (15)
• Skid Adapter - 3", 4", 5"
• Ramp, Ramp/Park Brake
• Custom Paint Colors

Adjustable fork width can be set from 21" to 27" or anywhere in between.  Just loosen and reset front and rear adjusting bolts.

Features:

• Patent Pending
• 5 year pump warranty
• 7" moldon polyurethane steering wheel
• 3" moldon polyurethane load wheels
• 7.75" raised height
• 3" lowered height
• 5,500 lb capacity
• Part #: 272744
• Forks: 21-27" x 48"
• Weight: 180 lbs

• 1 year pump warranty
• Polyurethane load and steering wheels
• Weighing accuracy ± .22 lbs., or 3.5 oz.
• LCD display scale
• Metler-Toledo Hawk scale/sensor
• UL approved scale operates on six D cell
• batteries or AC
• Three position hand control
• 205° turning radius

• 1 year pump warranty
• 12 volt battery - charger included
• 10-12 second lift time unloaded
• Overload bypass
• Polyurethane wheels
• 180° steering radius
• Comfort coated handles
• Part #'s 272939 & 272937
• Weight: 315 lbs. & 322 lbs.
• Lowered forklift height: 3.3" & 3.3"
• Raised forklift height: 31" & 31"
  

• 1 year pump warranty
• Moldon polyurethane wheels
• 180° steering arc
• Loop handles with inside hand control
• Closed pallets must be placed on top of forks
• Part #'s 272755 & 272754
• Weight: 2,200 lbs.
• Lowered Height: 3.6"
• Raised Height: 31.5"

• Part # 272950
• Forks tilt up to 90 degrees for accurate load positioning
• Lifting range with forks in horizontal position - 3.25" to 11"
• Lifting range with back rest in horizontal position (forks tilted upwards to 90 degrees) - 29" to 37"
• 5" polyurethane swivel casters and 3" polyurethane load wheels
• Fork length: 31"
• Fork width: 21.5"
• 2,200 lb capacity
• Weight: 393 lbs
• Load center: min. 7.5", max. 15.5"

• 2 year pump warranty
• Adjustable fork connecting rods
• Overload bypass
• Rubber coated handle
• 7.25" raised height
• 2.9" lowered height
• 6.5" wide forks
• 7" moldon polyurethane steering wheels
• 3" moldon polyurethane load wheels
• 5,500 lb capacity

• 1 year pump warranty
• Heavy duty steel construction
• Polyurethane load and steering wheels
• Pallets with bottom boards must be placed on top of forks
• Weight: 172 lbs.
• Capacity: 1,100 lbs.
• Lowered Height: 3.2"
• Raised Height: 35"

• 1 year pump warranty
• All parts are made of stainless
• For use in the food industry and areas where corrosive solutions are used
• Nylon rollers and wheels

• 3 year pump warranty
• Lowered height 3.4", Raised height 8.5"
• Fork height in standard mode 3.4" lowered, 7" raised
• Fork height for lateral movement 7.25" lowered, 8.5" raised
• Adjustable fork connecting rods
• Overload bypass
• Ergonomic rubber-coated handle
• Entry rollers

Convenient fork truck work platforms quickly and safely transport maintenance personnel where they are needed. Attaches to fork truck by inserting forks into fork pockets and chaining platform to fork truck. Tine lock must be engaged to secure platform to forks. 42" high handrail with 21" high mid-rail on three sides. 60" high expanded metal backing on fourth side (84" high backing to meet California OSHA specifications). Includes checker floor plate platform and 36" long strap with hook to attach platform to fork truck. The usable fork pockets are 7-3/4"W x 3-3/8"H in rear and 7-3/4"W x 1-7/8"H in front. Capacity is 1,000 pounds. Welded steel construction.  Powder coat blue finish. The Full Featured units include a Emergency Stop Button Kit and Web Lanyard with Safety Harness.

Elevate personnel and pallets to overhead racks and shelving for safe, convenient access.  Accommodates one person and a 42" long pallet. Attaches to fork truck by inserting forks into fork pockets and chaining platform to fork truck. Pin type tine lock standard. 42" high handrail with 21" high mid-rail on two sides. 60" high expanded metal backing on fourth side (84" high backing to meet California OSHA specifications). Includes checker floor plate platform and 36" long chain with hook to attach platform to fork truck. Usable fork pocket size is 71⁄2"W x 21⁄2"H.  Welded steel construction. Powder coat blue finish.

Elevate personnel to overhead racks and shelving for safe, convenient access. When not in use, unit can be folded down and moved out of the way by just one person. Unit stores conveniently in a 4" deep bottom base, with an overall height of 11-9/16". 38" high handrail with 231⁄2" high mid-rail on three sides. 60" high expanded metal backing on fourth side. Includes checker floor plate platform, tine lock and 36" long chain with hook to attach platform to fork truck.  Usable fork pockets measure 7-3/4"W x 3-7/8"L on 26" centers. Powder coat yellow
finish. Steel construction.

Simply slide the forklift tines into the sleeves under the platform, secure it, and the lift truck is converted to a portable manlift. The platform is diamond plate with formed 4" toeboards. The unit is secured to the lift truck with a tine lock, a mechanism that rotates up behind the left forklift tine, preventing the platform from sliding forward off the tines.  In addition, a chain with a hook is welded to the base, which wraps around the lift column of the lift truck and hooks back to itself or to the platform. An additional safety feature is the tine stop. This prevents the forklift operator from sliding the tines down the middle of the unit, between the tine sleeves. Ships setup with no assembly required. Workmaster Platforms are powder coated with high gloss powder. Pick your color from 11 stock choices.

An economical alternative to powered stock pickers, The Stockmaster is a versatile accesory to a fork lift. The Stockmaster allows a worker to rise with a palletized load to pick or place stock. Safety features include a fall protection lanyard, tine locks that prevent The Stockmaster from sliding forward, and an 84" tall backguard to block pinch points on the lift columns. Powder coated in 90+ gloss powder. Pick your color from 11 stock choices.