Lifts - Lift Tables

Wesco Standard Duty Tables

Features:

• LT-02-1616 has four 3" polyolefin swivel casters
• LT-02-1616 ships via UPS knocked down
• LT-05 and LT-10 models feature 2 rigid and 2 4" phenolic resin roller bearing casters
• 7 gauge steel top and base
• Floor locks standard on all 500+ lb capacity tables
• 3/8" lift per stroke

Features:

• 2 rigid and 2 swivel 6" phenolic resin roller bearing casters
• LTL models feature 4" casters and 3/8" lift per stroke
• LT models feature 6" casters
• Four support posts and push handle
• Foot operated floor lock

Wesco Value Lift Tables

Features:

• Polyurethane casters, 2 rigid and 2 swivel
• Foot operated pump and release
• Ships KD

Vestil Manufacturing Double Scissor Lift Table

Achieve the extra reach you're looking for with our Double Scissor Lift Tables. These full featured electric hydraulic scissor lift tables are used by all types of manufacturing and warehouse facilities. Safety features include: electric toe guard to protect pinch points during lowering of the table, velocity fuse to stop falling due to loss of hydraulic pressure, 24VAC push-button hand control, maintenance prop, and upper travel limit switch to stop table at maximum height reducing motor wear. 2 HP, 460V, 3-phase, 60 Hz totally enclosed motor standard, other voltages available. 3000 psi hydraulic component rating.

• All welded steel construction meets AWS standard.
• Pinch Point Guard standard.  Being prepared is the best prevention.
• 3000 PSI component rating on swaged hoses and fittings.
• Industrial quality, 56 frame, 2 HP motor delivers best torque with minimal amperage draw and maximum life.
• 24 Volt, fused control circuit..
• Adjustable upward travel limit switch.
• Rugged deep section double scissor legs for superior strength and height.
• Brass safety velocity fuse in hydraulic actuator prevents sudden drop.
• State of the art bearings for long life - pins and bearings are replaceable.
• Voltage - 208-230/460 Volt, 60 cycle, 3 phase.
• 1,000 - 6,000 Lbs. capacity available.
• Comes standard with 24 Volt Hand Control

Wesco Ergonomic Scissors Tilt Table

Features:

• Allows operator to feed and unload parts from an ergonomic position
• Foot activated hydraulic cylinder
• As table is raised, the top automatically tilts to a 45 degree angle at full elevation
• Retaining lip keeps containers in place
• Locking bar prevents accidental lowering of table

Wesco Mobile Scissors Lift Table

Features:

• Three position finger control - raising, neutral, lowering
• Polyurethane load wheels with locking 5" x 1.5" swivel casters
• 44.25" high handle for comfortable use
• Foot guard standard
• 660 lb Capacity

Wesco Light Duty Scissors Lift Table

Features:

• Capacity 330 lbs
• Chrome plated handle and foot pedal
• Lever release handle
• 4" x 1" moldon polyurethane wheels with locking swivel casters
• Folding flat handle lays flat on table top
• Foot operated pump

Wesco Scissors Lift Table

Features:

• Foot operated pump
• Easy to use spring loaded release lever
• 5' x 1.5" polyurethane casters with locks
• 770, 1000 lb Capacity

Wesco Double Scissors High Lift Table

Features:

• Capacity 770 lbs
• Chrome plated handle and foot pedal
• Lever release handle
• 5" x 1.5" moldon polyurethane wheels with locking swivel casters
• Foot operated pump
• Maximum raised height 55.5"

Autoquip Series 35 Scissor Lift

Series 35 is the most versitile and popular family of lifts from Autoquip. This family of lifts incorporates the Autoquip quality that is respected worldwide. Work positioners such as these reduce worker fatigue and greatly reduce the serious back injuries to workers. They bring the work to the worker and increase a factory's productivity.